SENSECOM-OMD-P

Code: 86
€135 –2 %
20210504 162302 co
€135 –2 % €132 €159,72 incl. VAT
In Stock (3 pcs)

Retrieves consumption data from Power Meter by optical reading head (IEC62056-21 compliant),1-13 registers to be read-out, uses SIGFOX IoT network, powered via USB-C connector (no batteries).  

SEAMLESS installation using built-in magnet - just hang on the meter, connect adapter or powerbank to the device via USB-C and turn on. 10 YEARS without battery replacement (for one reading a day). 

Detailed information

Product detailed description

SENSECOM-OMD-P reads-out consumption data from the device like Power Meter or other metering device using optical reading head defined by IEC 62056-21 mode C. Date are sent data via a nationwide SIGFOX IoT network to the cloud. Please check SIGFOX network coverage at your location.

SEAMLESS installation using just magnet attachment - now screws, just hang on the meter, attach to adapter/powerbank and turn on.

Device is primarily powered via USB-C connector(adapter or power bank is not included), can be backed up by 2x 3,6V Li-SOClbatteries size "A" (not included).,

SENSECOM-OMD-P is universal model option - you can set up to 13 OBIS registers to be periodically read-out from the meter (read-out period 15min-24h). This powered type is usefull for frequent read-outs (e.g. 1 register each 15min). Read-outs are limited by by minimum 15min interval, messages (each with one register) by minimum 10min, e.g. there can be sent 4x single register read-outs within 1h (each 15min) or 5 registers from single read-out each 1h ( +1 message for eventual alarm).

Device detects manipulation by shaking or turning the device using accelerometer and sending the alarm message.

SENSECOM-OMD-P can be paired to SENSECOM-WSH repeater in the area of unsuficient SIGFOX signal (e.g. metal cabinets, shafts, basements). Repeater is located then in an area of sufficient SIGFOX signal, no more than 20m from the SENSECOM-OMDP device. The alternative can be also hat-type antenna for ISM band placed on the top of metal cabinet with 75 cm coax cable ended by SMA connector.

Typical applications:

Daily or more frequent power consumption/supply monitoring or daily profile monitoring.

Monthly pre-payments adjustments, monthly/seasoning payments based on actual consumption.

Leased facility/space utility consumption billing.

Download section:

SENSECOM OMD Datasheet EN_V1.2

Additional parameters

Category: Remote Consumption Readers
Warranty: 2 years
Meter interface: Optical head
Installation: Magnet attachment (no installation)
Meter communication protocol: IEC62056-21, mode C
Max number of reading registers (OBIS codes): 13
Reading interval (sending data): 15min - 24h (default 24h)
IoT Network: SIGFOX
Repeater SENSECOM-WSH applicable: Yes
? Power supply: via USB-C